Skip to content
Gas

Lawn Mower Fuel System Cleaning with HEET

By Jeff Mercer · Updated January 7, 2023 · 3 min read
Lawn Mower Fuel System Cleaning with HEET
DisclosureSome links on this site are affiliate links — if you buy through one we may earn a small commission at no extra cost to you. It never decides an answer. A post a brand paid for, or one with a brand's paid link to its product, says so in its first line.

Hey there! My name is Jeff and I’m here to talk to you about using HEET as a fuel system cleaner for your lawn mower. You see, I have a bit of a history with lawn mowers. Growing up, I was always the go-to guy in the neighborhood for fixing up people’s mowers.

But it wasn’t until I started using HEET that I realized just how much of a difference it can make in keeping your mower running smoothly. So sit back, grab a cold one, and let me tell you all about it.

Why Clean Your Lawn Mower’s Fuel System?

Over time, your lawn mower’s fuel system can get gummed up with all sorts of gunk. This can be caused by a variety of things, such as old gasoline, moisture in the fuel, and even rust

All of this gunk can clog up your fuel filter, fuel lines, and carburetor, which can lead to all sorts of problems. Your mower may not start, or it may run poorly and lose power. Cleaning your fuel system can help to prevent these issues and keep your mower running smoothly.

How HEET Can Help

HEET is a fuel additive that is specifically designed to help clean your fuel system and remove gum and varnish deposits.

It contains a powerful cleaning agent called isopropyl alcohol, which helps to dissolve the gunk that can build up in your fuel system. By using HEET on a regular basis, you can help to keep your fuel system clean and prevent issues with your mower.

How to Use HEET as a Fuel System Cleaner

Using HEET as a fuel system cleaner is easy. Simply follow these steps:

  1. Drain the old fuel from your mower’s fuel tank.
  2. Refill the fuel tank with fresh gasoline and add the recommended amount of HEET as stated on the product label.
  3. Start the mower and let it run for a few minutes to allow the HEET to circulate through the fuel system.
  4. Turn off the mower and let it sit for at least an hour to allow the HEET to work its magic.
  5. Restart the mower and let it run until it’s out of fuel. This will help to flush any remaining gunk out of the fuel system.

It’s a good idea to use HEET as part of your regular maintenance routine, such as every time you change the oil or every few months. This will help to ensure that your fuel system stays clean and your mower runs smoothly.

FAQ

Can I Use HEET in All Types of Lawn Mowers?

HEET is safe to use in all types of lawn mowers, including gas, electric, and cordless models. Just be sure to follow the dosage instructions on the product label for the best results.

Is HEET Safe for the Environment?

HEET is an environmentally friendly product that is safe for use in all types of engines. It is formulated with a high concentration of isopropyl alcohol, which is a renewable resource and biodegradable.

So not only will HEET help to keep your mower running smoothly, it’s also good for the planet.

Can I Use HEET in Other Types of Engines?

HEET is not just for use in lawn mowers. It can also be used in other types of small engines, such as chainsaws, leaf blowers, and snowblowers.

It’s a versatile product that can help to keep all of your small engines running smoothly.

Conclusion: Give Your Fuel System the HEET it Needs

So there you have it, folks. Using HEET as a fuel system cleaner for your lawn mower is a simple and effective way to keep your mower running smoothly and extend its lifespan.

Whether you’re dealing with a stubborn engine that won’t start or just want to give your fuel system a little TLC, HEET is the way to go. Plus, with its biodegradable and environmentally friendly formula, you can feel good about using it.

So next time you’re filling up your lawn mower’s fuel tank, don’t forget to add a little HEET to the mix. Your mower (and wallet) will thank you.

Before you start the repairWe are not certified small-engine technicians. Before any repair, pull the spark plug wire and let the engine cool. Anything involving blades under a raised machine, fuel system leaks or transmission internals — if you're not sure, have a dealer or small-engine shop look at it.

Written by

Jeff Mercer

Jeff Mercer writes GardenTooly's answers to the questions people type into a search bar while standing next to a machine that won't behave: why the deck shakes, why the mower dies when it warms up, whether a bent blade shaft can be straightened, what the difference between two transmissions really means for you, and which fuel additive is worth the shelf space.

Each answer starts with the cause that is most likely and cheapest to check. Where it comes from the owner's manual, a service bulletin or what owners report, it says so, and anything involving blades, fuel, a jacked-up machine or a hydrostatic transmission gets a plain "take it to a shop" when that's the right call.

A note on our names: GardenTooly is written by a small team under pen names, one name for each job, and Jeff Mercer is the name on our mower and small-engine guides. We are not certified small-engine technicians, and we don't sell equipment.

Keep reading